Sangean RCR-10 - Manual (Page 25)

24
GB
Clock and Alarms
Setting the time format
The clock display used in stand-by mode and on the playing mode
screens can be set to 12 or 24 hour format. The selected format is
then also used when setting the alarms.
1. Press and hold the Info/menu button to enter the menu setting.
2. Rotate the Tuning control until CLOCK XXH appears on the display,
then press and release the Tuning control to enter the setting and the
setting of time format begins to flash.
3. Rotate the Tuning control to select either 12 or 24 hour format.
Press and release the Tuning control to confirm your choice of
clock format. The display will then revert to the previous menu.
If the 12 hour clock format is chosen, the radio will then use the 12 hour
clock for the setting of alarms with a PM indicator.
Setting the date format
1. Press and hold the Info/menu button to access the menu setting.
2. Rotate the Tuning control until “DATE FORMAT” shows on
the display. Press and release the Tuning control to enter the date
format setting.
3. Rotate the Tuning control to select the required date format.
Press and release the Tuning control to confirm your choice of
date format. The display will then revert to the previous menu.
2,3