Sangean U2 (V1) - Manual (Page 6)

GB
AC adaptor ( included )
The AC adaptor for use with the Utility Radio
provides 6V DC output at 1 ampere center pin positive.
Remove the rubber sheet which covers both the DC
socket and earphones jack, insert the adaptor plug into
the DC socket of the radio. Whenever the adaptor is
used, the batteries are automatically disconnected.
The AC adaptor should be disconnected from the mains
supply and the radio when not in use.
Operating your radio FM
1. Turn on your radio by switching the Power knob to
FM position.
2. Rotate the Tuning Control to select the desired station.
On FM, the tuning scale is marked in MHz (Megahertz).
The tuning LED will be lighted on, if the radio station
has been correctly tuned.
3. Adjust the Volume Control for comfortable listening.
4. To switch off the radio , turn the Power knob to Off
position.
5. The soft spring antenna is used for FM band reception.
5