Sangean WFT-1 (R1) User Manual

Page 3

Advertising
background image

2

GB

Important safety instructions

1. Read and understand all safety and operating instructions before the

radio is operated.

2. Retain instruction: The safety and operating instructions should be

retained for future reference.

3. Heed warnings. All warnings on the appliance and operating

instructions should be followed.

4. Follow all operations and use instructions.

5. Water and moisture: The appliance should not be used near water.

Do not use near a bathtub, washbowl, laundry tub, kitchen sink,

wet basement, swimming pool, etc.

6. Unplug the radio from the AC power outlet before cleaning. Use only a

damp cloth for cleaning the exterior of the radio. Clean the radio only

with dry cloth.

7. Do not place the radio on an unstable cart, stand, bracket or table.

The radio may fall, causing serious personal injury and damage to

the radio.

8. Ventilation: This radio should be situated so that its location or

position does not interfere with its proper ventilation. For example,

the radio should not be used on a bed, sofa, rug or other soft

surfaces that may block the ventilation openings. It should not be

placed in a built-in situation like a cabinet that may reduce air flow

through the ventilation openings.

9. Don’t install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (include amplifiers) that produce heat.

10. Don’t install defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding-type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug doesn’t fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

11. Power sources: The radio should be operated only from the type of

power source indicated on the marking label. If you are not sure of

the type of power supply to your home, consult your radio dealer or

power company.

12. Power cords: The power cord should be positioned so it is not

walked on, pinched, or items placed on top of it. Pay particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the unit. Unplug the power cord by

gripping the power plug, not the cord. Operate the radio using

only the current type of power source indicated. If you are not sure

of the type of power supply to your home, consult your dealer or

local power company.

13. Do not overload wall outlets or extension cords. This can result in a

risk of fire or electrical shock. Never insert objects of any kind into

the radio through opening. The objects may touch dangerous

voltage points or short out parts. This could cause a fire or

electrical shock.

Advertising