Storix Software SBAdmin User Guide - Manual (Page 117)

even those from different jobs. The information about the backup will be preceded by the backup
sequence number, starting with 1 and ending with the last backup on the media.
The following is a sample of this screen:
You may select the backup from which to recreate the LV or filesystem by clicking on the button to the
left of the desired selection and a checkmark will appear in the button. Only one selection may be
made. If you select a different option, the checkmark will be removed from the previous selection. After
making your selection, click the
Continue button at the bottom of the screen.
10. You will be returned to the previous window, where you must select each of the following:
Client on which to create - If using Network Edition, this field will show the original client from which
the backup was made. The backup information may be used to create the logical volumes and
filesystems on a different client by selecting the arrow button to the right of this field and selecting a
different client from the list.
Logical Volume(s) to create - To list and select the logical volume(s) (and filesystems) that are
defined on the backup and select one or more to create from the list, select the arrow next to this field.
You must select at least one logical volume to continue.
11. When all selections have been made, press the Continue button at the bottom of the screen. A new
screen similar to the following will appear and the LVM data on the media will be retrieved and checked
for consistency with the current system configuration:
If there are changes required to make the selected volume group fit onto the current system, the Edit
and Fix buttons will become available. If there are no problems found, the Create button will be
available.
Storix System Backup Administrator 117 Version 8.2 User Guide