GiiNii GD-250 - Manual (Page 5)

4
Notes on Installation
1. Install the device near the rear-view mirror to obtain the best open-field view. Do NOT install the
Dash Cam in a location that will obstruct your required driving view.
2. Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view
even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be left on the lens and will result in
unclear videos or snapshots. Clean the lens on a regular basis.
4. Do not install the device on a tinted window. Doing so may damage the tint film.
5. Make sure that the installation position is not hindered by the tinted window.
Caution
¾
Use the authorized charger only.
¾
Never disassemble or attempt repair of this product. Doing so may damage the Dash Cam,
cause electric shock and void your product warranty.
¾
Never short-circuit the battery.
¾
Exposing the Dash Cam to open flames can cause explosion.
¾
Due to local laws and vehicles safety considerations, do not manually operate the device while
driving.
¾
GiiNii Global Company is NOT responsible for the loss of any data/content during operation.
¾
Before mounting, please check with the local DMV for the traffic laws of the location/method to
mount appropriately.
¾
Audio recorded with the video may not be valid jurisdictional evidence; and it may be illegal to
present such audio to the jury in some states.
¾
AV out port uses normal AV cable.
Before you start using the Car Dash Cam it is assumed that you agree to
the above statements.