Warpia SWP120A RevB SteamHD Getting Started User Guide - Manual (Page 3)

2. HARDWARE INSTALLATION:
After the software has been installed, insert PC Adapter into an available USB port.
3. ESTABLISHING INITIAL WIRELESS CONNECTION WITH
TV/MONITOR/PROJECTOR:
Plug the Receiver Base into an electrical outlet using the power cord provided.
Connect the Receiver Base to the TV/Monitor/Projector using an HDMI
or VGA cable with the appropriate sound cable when required.
(cables not included)
Open the UWB Connection Manager by double-clicking the UWB Connection
Manager icon located in the System tray/Notification Area of your Windows ® desktop.
4. CONFIGURING VIDEO SETTINGS:
You can choose to set the StreamHD’s video output to either Extend mode or
Mirror mode. The default setting on most operating systems is Extend mode.
Extend mode extends your desktop space across multiple monitors.
Mirror mode duplicates the image on your computer screen on the external monitor
To configure the Video Settings in Windows ® 7, press the Windows key together with
the P key( + P), and then the following menu will appear:
For Mirror Mode, choose Duplicate, for Extend Mode choose Extend
For changing the setting in Windows
® XP and Vista, refer to the Installation and
Troubleshooting guide located on the CD or at www.warpia.com/support
Move the cursor over the StreamHD
Device Icon and click on the Connect
Tab to establish a connection
After the wireless connection is
established,a yellow star will then appear
next to theStreamHD Device Icon, making
it thedefault device for future connections.
M h h S HD
ure t
( + + ey( + P), and then the following menu will appear: +
ur computer screen o