C. Crane Senta Ally - Manual (Page 9)

While in FM mode, press the M button to enter the FM Menu. Once you have found the desired
frequency, press the M button once to enter the FM Menu. Highlight Save Channel and single-press
the Play/ Pause button. The station is now saved to your presets. Repeat the above to add more
presets.
Once you have manually saved all your presets, press and hold the M button to return to the main
menu. Highlight and select FM Radio to enter FM mode. Now all your presets can be selected by
using the left or right arrow buttons.
To exit the FM Settings menu, single press the M button. To exit to the Main Menu, press and hold
the M button for 3 seconds.
Setting a Preset - Manually
About Audio Input
The Senta-Ally can play audio from an external audio source such as a portable music or video
player. Make sure the external audio source device is turned off before connecting to the Senta-Ally
and make sure the Senta-Ally’s volume is also turned all the way down.
Connect the Aux jack on the side of the Senta-Ally to the audio output jack of the external audio
source device using the provided 1/8” stereo audio connection cable. Power the external audio
source on, and set the volume to about 75%; this is our recommended starting point but depending
on your external audio source, adjust the output level carefully to avoid distortion.
From the Audio Input mode, you may mute the audio using the Play/ Pause button. You may also
control the volume using the volume control wheel on the right side of the Senta-Ally. Press and
hold the M button for 3 seconds to
access Menu to select.
All other playback functions must be
controlled using the external audio
source.
14 15
Setting a Preset - Automatically
The Senta-Ally has an easy to use auto-preset function. Once you have entered FM Radio
mode, press the M button to enter the FM Menu. Highlight Auto Search and single press the the
Play/ Pause button. The Senta-Ally will now
auto-search for FM stations within range and
automatically designate them to your presets
in order from lowest to highest frequency.
Once the scan is complete, use the left or
right arrow buttons to skip through the memory
resets.