Cecilware KS218RDB User Manual
Page 2
Parts List- See Section 1
a. 1 Stainless Steel Sink Top
b. 4 Galvanized Legs
Assembly - See Section 2
• Carefully take all of the parts out of the box.
• Turn sink upside down and set on floor or level surface.
• Align each leg with leg socket on sink and screw into place.
• Adjust the legs so that they are level and firmly affixed in the sink
socket.
• Turn sink right-side up. If there is any movement in the sink, the feet
can be used to make adjustment and level the sink ready for use.
Care of the Sink
• Clean the sink regularly as required, using a cleaning agent
recommended for stainless steel and galvanized legs.
• Always clean off any cleaning agent residues, as failure to do so may
cause discolouring and marks to develop.
• Never leave any surface with water or damp areas, as this may cause
discolouration.
Warning
• Whilst Cecilware attempts to remove all sharp edges, care must be
taken when cleaning or handling the sink to prevent the risk of injury
from exposed metal edges.
• Do not overload the sink causing it to bend.
Cecilware Corporation
43-05 20
th
Avenue
Long Island City, NY 11105
Tel: 800-935-2211
Fax: 718-932-7860
www.cecilwarephotos.com