2 utp xover switch – CANOGA PERKINS 8829 UTP-to-Fiber Optic Media Converter User Manual
Page 21
Advertising
8829 Media Converter
Canoga Perkins
21
POL
UTP Receive Polarity Reversed
(Yellow)
When lit, POL indicates that the UTP
port is receiving polarity-reversed data
3.2 UTP XOVER Switch
The converter can be configured to connect to ei-
ther standard DTE devices, or to repeaters (which
usually cross their XMT and RCV pairs internally)
without the need for special crossover cables.
To connect the 8829 Media Converter to a stan-
dard DTE device with a standard straight-through
cable, set the XOVER switch to the X (internally
crossed) position.
To connect the 8829 Media Converter to any
10BASE-T port marked with an X (such as most
repeaters) with a standard straight-through cable,
set the XOVER switch to the N (normal) posi-
tion.
Advertising