CANOGA PERKINS 9119 Rack Mount 100BASE-TX/FX Media Converter - Manual (Page 9)

9
9119 Media Converter Canoga Perkins
1. Introduction
The Canoga Perkins Model 9119 100BASE-TX to FX Media Converter provides 100Mbps fiber optic connectivity be-
tween 100Mbps switches and/or work stations.
The 9119 Media Converter allows users who already possess Fast Ethernet switches to convert from a 100BASE-TX UTP
interface to a 100BASE-FX-based single mode fiber optic interface and exceed the 100BASE-FX multimode limitation of
2km on fiber optic cable, in full-duplex (FDX) mode and achieve greater than 100km connectivity.
The 9119 Media Converter is also especially suited for harsh manufacturing environments where immunity to noise and
electrical / magnetic interference or security considerations are of particular importance. Conforms to NEBS Level 3
Standards.
The 9119 Media Converter comes in four versions:
•
100BASE-FX 1310nm Multimode (MM) LED (11dB loss budget)
•
100BASE-FX 1310nm Single Mode (SM) LP Laser (10dB loss budget)
•
100BASE-FX 1310nm Single Mode (SM) LD Laser (26dB loss budget)
•
100BASE-FX 1550nm Single Mode (SM) XD Laser (26dB loss budget)
The 9119 Media Converter has the following features:
•
Converts UTP interfaces to fiber
•
Link Loss Forwarding from fiber port to the UTP interface
•
Remote Fault Detection and Alarm Forwarding on the fiber interface
•
Normal or crossed-over UTP connections
•
Dry Contact Alarm Relays
•
Provides noise / interference immunity
•
Provides virtually untappable security
•
Distance exceeding 100km on fiber
•
Single Mode or Fiber Support (Multimode)
•
Six status LED indicators
•
ST and SC connectors
1.1 Ship List
The following items are included:
•
9119 Media Converter
•
User Manual
•
Wall-Mount Power Supply with 6-foot power cord
•
Tie Wrap/Velcro Kit
•
Ten-foot Category 5, Twisted Shielded Pair (STP) patch cable