Cowon Systems IAUDIO 4 - Manual (Page 37)

iAUDIO 4
36
iAUDIO 4
37
Troubleshooting
Symptom Remedy Explanation
iAUDIO does not
power on.
Make sure that the polarity of the
installed battery is correct.
iAUDIO does not work if the polarity of the
battery is switched.
Replace the battery with a new one. iAUDIO does not work when the battery is
dead.
Remove the battery and insert it again. Check if contact areas of the battery (+ &
- poles) are clean.
There is no sound. Make sure that there are mp3 files in
the memory.
iAUDIO does not work if there is no file saved
in the memory.
Check if the ‘Hold’ button is set to
ON. If it is, set the ‘Hold’ button to
OFF and try again.
iAUDIO does not work when the Hold button
is set to ON.
FM Radio does not
work.
FM reception sensitivity may be weak and you many not be able to hear FM Radio
clearly depending on where you are, such as inside a building or a moving car, or on some
stretches of a subway. In addition, listening to the radio may become impossible in radio
wave shade areas.
If FM radio does not work where radio reception should be possible, there may be a
problem in the reception module. In this case, please contact our AS Center.
Characters on LCD are
abnormal.
Change the language setting to ‘English’ in the ‘Country & Language’ menu of iAUDIO,
and select ‘File name’ in the ID3 tag adjustment menu. If the problem continues, contact
our AS Center. However, some special foreign characters may be displayed abnormally
due to restriction of embedded fonts.
The displayed/used
capacity of flash
memory is reduced.
(E.g.: 119MB is
displayed for 128MB
memory)
Some of the flash memory in iAUDIO is used for system area.
Therefore, when we exclude the system area essential for normal operation of iAUDIO, the
actual capacity of the flash memory is somewhat reduced.
For example, with a 128MB product, about 119MB of memory capacity is normal.