CANOGA PERKINS CanogaView Smart Element Manager - Manual (Page 27)

CanogaView ® Smart Element Manager
Standalone Version 21
à 5U Chassis View Graphical display for an individual 5U Chassis
à Alarm Monitor Alarm filter for the selected Chassis and its
components
à Telnet Telnet to the DMM managing the domain
à Reports Chassis specific reports for this chassis and all of
its components
à Chassis Status Chassis level status
à CIM View Graphical display of CIM device
à Alarm Monitor Alarm filter for this device only
à Telnet Telnet to the DMM managing the domain
à Status CIM module level status
à Configuration Display and edit CIM level features
à DMM View Graphical display of DMM device
à Alarm Monitor Alarms filtered for this device only
à Telnet Telnet to the DMM managing the domain
à Status DMM module level status
à Configuration Display and edit DMM level features
à Reset Reset the selected DMM device
à Power Supply – AC View Graphical display of 5U AC Power Supply
à Alarm Monitor Alarms filtered for this device only
à Telnet Telnet to the DMM managing the domain
à Power Supply – DC View Graphical display of 5U DC Power Supply
à Alarm Monitor Alarms filtered for this device only
à Telnet Telnet to the DMM managing the domain
à LAN Extension Products View Graphical display of 1230 device and installed 3xx
slot devices. This level will be bypassed if the
user selects one of the devices within a slot vs the
1230 device.
à Alarm Monitor Alarms filtered for this 1230 device and installed
devices
à Telnet Telnet to the DMM managing the domain
à Status 1230 module level status
à Configuration Display and edit 1230 device level features
à Reset Reset or Reset/Swap options for one or all
installed slot devices
à Device 3xx View Graphical display of individual 3xx Lan device –
circuit view displayed if side band mgmt available
for the type of 3xx device installed
à Alarm Monitor Alarm filter for the 3xx device selected
à Telnet Telnet to the DMM managing the domain
à Status 3xx module level status
à Configuration Display and edit 3xx device level features
à Reset Reset the selected 3xx device
à Modem Product View Graphical display of T3 2x4x or T1 2x6x products
showing circuit level with redundancy if installed
à Alarm Monitor Alarms filtered for all modems on this circuit –
local, remote and redundant
à Telnet Telnet to the DMM managing the domain
à Status Circuit level status
à Configuration Display and edit modem level features
à Reset Circuit level reset for one or more modems
à 600x Product View
à Alarm Monitor Alarms filtered for the 600x device selected
à Telnet Telnet to the DMM managing the domain
à Status
à Configuration
à Reset
à 6100 Product View
à Alarm Monitor
à Telnet Telnet to the DMM managing the domain