CANOGA PERKINS 9171 Command Reference - Manual (Page 587)

CanogaOS Command Reference
32-12
Examples
In the following example, the qos evc net-egress command is used to associate a QoS network egress
policy to an EVC and then applied it to interface eth-0-2.
Switch(config)# ethernet evc evc100
Switch(config-evc)# qos-policy net-egress evc110-policy-at-egress-nni
Related Commands
None
32.17 show ethernet evc queue
Use this command to display queue information for EVC. Statistics of each queue will be provided if
queue statistic function is enabled.
Command Syntax
show ethernet evc [EVC-NAME (sap-egress | net-egress)] queue
EVC-NAME: This field is optional, which specifies the name of EVC.
sap-egress: If this argument is specified, only sap-egress queues of the EVC is displayed.
net-egress: If this argument is specified, only net-egress queues of the EVC is displayed.
Command Mode
EXEC Privileged Mode
Usage
None
Examples
In the following example, the show ethernet evc queue command is used to display queue information
for an EVC.
Switch# show ethernet evc queue
EVC: evc100
sap-egress policy: evc110-policy-at-egress-uni
Queue 0
Tail drop mode
Tail drop threshold (drop prec 0 -> 3): 56 60 64 108
Transmit 0 packets, 0 bytes
Drop 0 packets, 0 bytes
Queue 1
Tail drop mode
Tail drop threshold (drop prec 0 -> 3): 56 60 64 108
Transmit 0 packets, 0 bytes
Drop 0 packets, 0 bytes
Queue 2
Tail drop mode