Dillon EDjunior (Old) - Manual (Page 21)

EDjunior Dynamometer User Instructions 21
Figure 8.1 Good force measurement practice
Center the load
on the shackle pin.
Use spacers to
insure centering
where applicable.
Use only with
a pin of the
same diameter
and hardness
as the original
factory equipment.
Do not torque,
bend or
sideload.
Use hardware that allows
single point attachment
and freedom of alignment.
Do not use hardware that
is undersize or restricts
self-alignment. This results in
poor measurement
performance and possible
dangerous safety conditions.
Be sure fixturing does
not bind between the
body of the EDjr and
the shackle!