ClearSounds A1600E - Manual (Page 11)

11 – ENGLISH
█
Handset Name
This feature allows you to give each registered handset a name
in order to easily recognize each handset if you have more than
one registered to the base. To set the handset name:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press up or down to scroll to HS Settings and then
press under the word Select.
3. Press up or down to scroll to Rename HS and then
press under the word Select.
4. Enter the handset name (up to 9 characters) by using the
keypad and then press under the word Save to confirm
and exit. The handset name will be displayed above your
handset number in standby mode.
Note : If you make a mistake while entering the name, press
under the word Erase to correct it. Each time you press
this key, the last character is deleted.
█
Handset Reset
This function allows you to reset the handset settings for
Alarm, Audio Setup, Ring Setup, Tone Setup, Language, HS
Name, Auto Answer and Date & Time to the initial factory
settings. To reset the handset:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press up or down to scroll to Default and then press
under the word Select. You will be prompted to enter
the PIN.
3. Enter the PIN (the default PIN is 0000) and then press
under the word Select. If the PIN is validated, the
display will show Confirm?.
4. Press under the word Select to confirm or press
under the word Back to cancel and exit.
PHONE HANDSET SETTINGS