DVR systems DVRxx04LE-S(U) Series User Manual

Page 39

Advertising
background image

39

Important
Please note there is a series product does not support audio function. For this series product
user, you can skip the following contents.

3.7.1 Audio Input

These series products audio input port adopt BNC port, matrix and loop use BNC port. Device
supports bidirectional talk via BNC.
Due to high impedance of audio input, please use active sound pick-up. See

X285H285H285H

Figure 3-3.

Audio transmission is similar to video transmission. Try to avoid interference, dry joint, loose
contact and it shall be away from high tension current.

Figure 3-3

3.7.2 Audio Output

The audio output signal parameter is usually over 200mv 1KΩ (BNC). It can directly connect to
low impedance earphone, active sound box or amplifier-drive audio output device.
If the sound box and the pick-up cannot be separated spatially, it is easy to arouse squeaking. In
this case you can adopt the following measures:
z

Use better sound pick-up with better directing property.

z

Reduce the volume of the sound box.

z

Using more sound-absorbing materials in decoration can reduce voice echo and improve

acoustics environment.

z

Adjust the layout to reduce happening of the squeaking.

Please refer to

X286H286H286H

Figure 3-4

X

.

Advertising