Dynon Avionics SV-INTERCOM-2S - Manual (Page 9)

SV-INTERCOM-2S Installation and User Guide - Revision A 2-1
2. Installation
While the SV-INTERCOM-2S is designed to seamlessly complement a SkyView System, its design
is flexible enough to be used in any experimental or light sport aircraft panel that does not
required a TSO’d intercom. For a neat panel installation, a vertically-mounted SV-INTERCOM-2S
is dimensioned to 50% of the height of a SkyView SV-D1000 display’s bezel.
Physical Installation
The SV-INTERCOM-2S package includes #6-32 hex-drive round head fasteners (to
match those furnished with SkyView displays). Fasteners are 5/8” in length and
require a 5/64” hex drive tool. Dynon recommends fastening the included
mounting screws to nut plates installed behind the panel. If access behind the panel
allows, standard #632 lock nuts or nuts with lock washers can be used. Do not rivet
the SV-INTERCOM-2S to the aircraft as this will hinder future removal if necessary.
SV-INTERCOM-2S Panel Cutout and Mounting Hole Dimensions – NOT ACTUAL SIZE