Dynon Avionics D2 Wi-Fi Troubleshooting Guide User Manual
Page 7
D2 Wi-Fi Troubleshooting Guide Revised September 7, 2013
Page 7
AirTrack
AirTrack is an application that integrates with multiple data
sources, including AHRS to report flight and navigation
data wirelessly. The application is designed to integrate
primarily with a flight simulator, but is also useful as a
display of AHRS information.
To configure AirTrack to work with the D2, you need to
select the D2 as a data source. This is done on the opening
screen in the upper right corner. Select AHRS-G on
169.254.1.1 as the data source.
Tapping on the EFIS button will then bring up a display of the AHRS attitude information.
AirTrack uses UDP protocol and will therefore allow additional applications on other iPad devices to
simultaneously access the D2 data stream.