Compaq IJ1200 - Manual (Page 11)

Steps to basic printing
•
•
•
•
•
Steps to basic printing 7
Customizing printer settings for specialty
papers
When your printer software was installed, the Printer
Properties settings were set to the default settings. Use
the default settings for printing most documents on plain
paper. To change your printer settings for printing on
specialty papers, use the following table.
When you are
printing on:
Click this
Printer
Properties tab:
To make these selections:
Envelopes Paper From the Paper Size area, scroll to select
the appropriate envelope size.
Note: Your application may override the
envelope settings in Printer Properties.
Greeting cards,
index cards,
postcards, or
photo cards Paper
Document/Quality
Select the appropriate Paper Size setting.
From the Paper Type area, select
Greeting Card Stock.
Photo papers,
glossy or coated
papers Document/Quality From the Paper Type area, select
Glossy/Photo Paper.
Notes:
• You can print quality photos with the
black and color cartridge combination
that came with your printer. However,
for the best possible print quality,
replace the black cartridge with a
photo cartridge, part number
12A1990. For help, see page 22.
• When printing photos, remove each
photo as it exits from the printer and
allow it to dry before stacking.
Banner paper Paper From the list of Paper Sizes, select Banner
or Banner A4.