Cuisinart IB-8084 - Manual (Page 6)

6
PARTS AND ACCESSORIES
Remove all packing material and
accessories. Examine the oven for any
damage such as dents or broken door.
Do not install if oven is damaged.
1. Control panel
2. Turntable shaft
3. Turntable ring assembly
4. Glass tray
5. MicroGuide (DO NOT REMOVE)
6. Observation window
7. Door assembly
8. Grill rack
TURNTABLE
INSTALLATION
1. Hub (underside) of glass tray
2. Glass tray
3. Turntable ring assembly
4. Turntable shaft
• Never place the glass tray upside down.
The glass tray should never be restricted.
• Both glass tray and turntable ring
assembly must always be used during
cooking.
• All food and containers of food are always
placed on the glass tray for cooking.
• If glass tray or turntable ring assembly
cracks or breaks, contact your retail store
where purchased or Cuisinart customer
service, 1-800-726-0190. See page 20 for
details.
COUNTERTOP
INSTALLATION
1. Select a level surface that provides
enough open space for the intake an/or
outlet vents.
2. Do not remove the legs from the bottom
of the oven.
3. Leave a minimum clearance of 12 inches
(30cm) above the oven. A minimum
clearance of 3.0 (8cm) inches is required
between the oven and any adjacent
walls. One side must be open.
4. Remove any protective film found on the
microwave oven cabinet surface.
5. Do not remove the light brown mica
cover MicroGuide that is attached to the
oven cavity. The MicroGuide shields and
directs the wave action.
6. Blocking the intake and/or outlet
openings can damage the oven.
1
2
3
4
3.0 inch
(8 cm)
3.0 inch
(8 cm)
12.0 inch
(30 cm)
Open
1 2 5
6
7
8
4
3