Leica Geosystems Leica mojo3D - QuickStart Guide - Manual

Connecting to Virtual Wrench
An active SIM card and service account is required to connect to Virtual Wrench.
Allows user to obtain remote service.
Downloading software from Virtual Wrench
Allows user to download software from Virtual Wrench.
Upgrade Software via USB stick
Insert the USB stick into the USB port on the front of the Leica mojo3D then follow the menu.
Quick
Reference Guide
Total Quality Management: Our commitment to total customer satisfaction.
Leica Geosystems AG, Heerbrugg, Switzerland, has been
certifi ed as being equipped with a quality system which
meets the International Standards of Quality Management
and Quality Systems (ISO standard 9001) and Environmental
Management Systems (ISO standard 14001).
Ask your local Leica Geosystems dealer for more information about our TQM
program.
Leica Geosystems AG
Heinrich-Wild-Strasse
CH-9435 Heerbrugg
Switzerland
Phone +41 71 727 31 31
www.leica-geosystems.com
Ar
tic
le N
o: 791523-
1.0en
Or
ig
inal t
ex
t
© 2011 Leica G
eosys
tems AG, H
eer
br
ugg
, Switzer
land
Changing and Selecting
Allows user to recall saved fi elds
Allows user to recall saved boundaries
Allows user to recall saved guidance patterns
From these folders individual fi elds, boundaries, lines can be deleted
Or all data in these folders
Recalling saved fi elds, boundaries and guidance patterns
Changing and Selecting
For latest
software updates
please visit
www.VirtualWrench.com