Leica Geosystems Leica DISTO X310 - Manual - Manual (Page 5)

Leica DISTO TM X310 788479d 4
EN Operations
Switching ON/OFF Clear Message Codes
ON OFF
2 sec
Device is turned
OFF.
i
Press ON but-
ton 2 sec to start
continuous laser
mode.
1x
Undo last action.
2x
Leave actual func-
tion, go to default
operation mode.
If the message "InFo" appears with
a number, observe the instructions
in section "Message Codes".
Example:
Adjusting measuring reference / tripod
Distance is measured from the
front of the device.
1
i
Press button
2 sec and ref-
erence from
front is set
permanently.
Distance is measured
from the tripod thread
permanently.
2
Distance is measured from the rear
of the device (standard setting).
3