Leica Geosystems SKI-Pro - Manual (Page 63)

Quick Tour II - Post-Processing 63 Getting Started with SKI-Pro-2.5en
Make sure the Coordinate System
PP Sample WGS-local is selected.
Click on OK to close the Settings property page,
and finally,
Click Save to write the file to the harddisk.
If you open the ASCII file with a Text Editor it will display
the following information:
Congratulations !
You have successfully completed this Quick Tour.
You have learnt how to start a Project, Import GPS raw
data, process baselines, determine a transformation, how
to derive local Grid coordinates and finally how to export
these coordinates to a user-defined ASCII file.
Lesson Seven - Exporting Coordinates to an ASCII File, continued