Clone box use, Setting the “master” television, Uso de la caja de clonación – Panasonic CT-2010H User Manual
Page 9: Configurando la televisión “maestra, Caja de duplicación)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Clone Box Use
The clone box uploads (LEARN) the settings of
one television and downloads (TEACH) them to
other televisions. This places the television into
Commercial (Hotel) Mode.
Setting the “Master” Television
The features listed in the Commercial (Hotel)
Mode table must be adjusted before cloning can
begin.
1. Turn the television ON.
2. Access the Main Menu by pressing the
ACTION
button.
3. Access the Set Up menu.
Use the CH and VOL buttons to highlight the
Set Up icon, then press the ACTION button.
Use the CH buttons to highlight AUTO PROG
(Auto Channel Programming), then press the
VOL button to begin programming.
Note: This step is mandatory.
If necessary, use MANUAL PROG (Manual
Channel
Programming)
to
delete
any
undesired channels.
Press the ACTION button to return to the Main
Menu.
If necessary, access the Picture menu.
Use the CH and VOL buttons to highlight the
Picture icon, then press the ACTION button.
Use the CH buttons to highlight a feature, then
press the VOL buttons to adjust them.
Press the ACTION button to return to the Main
Menu.
If desired, access the Channel Caption
menu.
Use the CH and VOL buttons to highlight the
Ch Cap icon, then press the ACTION button.
Use the CH buttons to highlight the channel
number, then press the VOL buttons to select
characters for the channel caption.
Press the ACTION button to return to the Main
Menu.
Exit the Main Menu by pressing the
ACTION
button.
If necessary, set the maximum volume
level.
4.
5.
6
.
7
.
Model CT-2010H
Model CT-2010H does not have a digital
interlace on the back of the television. To
set the television, use the front panel.
Uso de la caja de clonación
(caja de duplicación)
La caja de donación graba (APRENDE) la
configuración de una televisión, y posteriormente la
duplica a otras televisiones (ENSEÑA). Esto coloca
a la televisión en la modalidad comercial (hotel).
Configurando la televisión “Maestra”
Las funciones listadas en la tabla de la
modalidad comercial deben ser ajustadas antes
de empezar este procedimiento.
1. ENCIENDA la televisión.
2. Presione el botón ACTION para accesar
al menú principal.
3. Accese al menú Set Up (Ajuste).
•
Use los botones de CANAL y VOLUMEN
para realzar el icono de Set Up, luego
presione el botón ACTION.
•
Use los botones de CANAL para realzar
AUTO PROG (programación automática de
canales),
luego
presione
el
botón
de
VOLUMEN para comenzar la programación.
Nota:
Este paso es obligatorío.
•
Si necesita, use la función MANUAL PROG
(programación manual de canales) para
borrar los canales no deseados.
•
Presione el botón ACTION para regresar al
menú principal.
4. Si necesita, accese al menú de Imagen.
•
Use los botones de CANAL y VOLUMEN
para realzar el icono de Imagen, luego
presione el botón ACTION.
•
Use los botones de canal para realzar la
función deseada, luego presione los botones
de VOLUMEN para ajustarla.
•
Presione el botón ACTION para regresar al
menú principal.
5. Si desea, accese el menú de títulos de
canal.
•
Use los botones de CANAL y VOLUMEN
para realzar el icono de Ch Cap, luego
presione el botón ACTION.
•
Use los botones de CANAL para realzar el
número de canal deseado, luego presione los
botones de VOLUMEN para seleccionar
caracteres para el título o identificación del
canal.
•
Presione el botón ACTION para regresar al
menú principal.
6. Presione el botón ACTION para salir del
menú principal.
7. Si necesita, ajuste el nivel máximo de
volumen.
T^rTTp
------------------------------
Modelo CT-2010H
El modelo CT'2010H no incluye una interface
digital en la parte posterior de la televisión.
Ajuste su televisión usando el panel frontal.
-
9
-