Caution, Board setting – Panasonic WJ-SX850 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
■ Board Setting
The following settings should be made by qualified service personnel or system installers.
1. Remove the front panel by removing two screws on
the panel.
2. Extract the Local CPU board by raising up the card
puller.
— Caution --------------------------------------------------------------------------------------------------------------------------
Hold this board only by its edges. Otherwise components on the board may be damaged by static electricity.
SW3: LCPU Reset Switch
SW2: Cord Cage Reset Switch
-4.
Advertising