Panasonic QTR 2140 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
UbbK'ii MANUAL
In the Auto Scan channels OSD. all
channels found will be listed. The
channel search may take a few
minutes. If you abort auto scan during
the scan process, some channels may
not be available to you.
« Manual Channel Search
In the “Manual channel search"
window you can set the channel
search by pressing left or right button
Ihen 02 lo select the physical channel
you want to search.
4. Restore Default Settings
If you wish to reset all previous new
settings, you can use this feature to do
so. Once you decide to restore default
(factory) settings, all previous settings
will be lost. Please be very careful
before you confirm this action.
5. Select Region
Using
<!>
you may select the
relevant region: New South Wales,
Victoria. Queensland, South Australia,
Western Australia, Tasmania. North
Territory. This setting will give you the
correct current time when the receiver
is in Stand-By mode.
6.5 Box Information
From here, you can get general information
about the Receiver ID, softw'are and
hardware version on which it is operating.
Box Information
SW Version T2140.C1-1.0.?
Serial !0
42949B7295
Model Name QTn2M0
HV/ Desciliiligii T2140.C1-4W1B/F32
iS