Panasonic PV-7664 - Manual (Page 24)

к <L- ^
Л Таре Operation
^шв^н^нвнкннн^^нвнн
COMMERCIAL ADVANCE^"^
COMMERCIAL ADVANCE^“ detects and marks the beginning and end points of commercials on your tape for
recordings over 15 minutes in length. When the COMMERCIAL ADVANCE'^'^ marked tape is played back, the VCR
automatically advances through the commercial segments at high speed. You can also set this feature to Manual
so as to have more control over the advance process.
The effectiveness of this system can vary due to differences in the way television stations broadcast.
See page
27
for answers to the most commonly asked questions about this feature.
Check list before you begin
□ All connections have been made and
the One Time Setup is completed.
n Your TV and VCR are plugged in and
turned on.
H] TV is tuned to the VCR channel (CH 3
or 4).
COMMERCIAL ADVANCE^” is a
trademark of Arthur D. Little Enterprises.
A Jerry Iggutden invention licensed by
Arthur D. Little Enterprises.
COMMERCIAL ADVANCE™ Marking
When the COMMERCIAL ADVANCE RECORD setting is ON, the
VCR automatically rewinds the tape after a recording has been made
and marks the beginning and end of any detected commercial blocks.
After marking is done, the tape is returned to the end of the
recording. Commercials are not erased from the tape.
о
Push MENU to display
the menu screen.
Push ÀT to select
“SET UP VCR,” and then
push ► to display the
“SET UP VCR” screen.
MENU
SET CLOCK
SET UP CHANNEL
IDI ОМА/ LANGUE: ENGL ISH
SELECT
SET
END
A ▼ KEY
► KEY
MENU KEY
Push AT to select
“SET UP
COMMERCIAL ADV.,”
and then push ► to
display the “SET UP
COMMERCIAL ADV.” screen.
............... SET UP VCR .....................
repeat play : ON
BEEPER ; ON
SPATIALI2ER ■ ON
SET UP COMMERCIAL ADV,
SELECT
SET
END
A ▼ KEY
► KEY
MENU KEY
Push AT to select
“C/A RECORD,” and
then push ► to set “ON”
or “OFF.”
SET UP COMMERCIAL ADV.
ON
C/A PLAYBACK AUTO
MARK UNMARKED TAPE.
SELECT :A T KEY
SET :► KEY
END :MENU KEY
ON
Timer recordings, VCR Plus+ recordings, and One Touch
Recordings are marked automatically.
OFF
The screen at right appears when
STOP is pushed during a normal
recording. Select one of the following:
Push the 1 NUMBERED key to mark
the recording now. The screen below
right will appear.
Push the 2 NUMBERED key, to mark
the recording later, after the power
has been turned off.
• If the tape is rewound and another
recording started before the power
is turnecToff, the commercials may
not be marked correctly.
Push MENU to cancel the marking of
this recording.
The VCR will not mark commercials.
Off should be selected when you are
editing or dubbing a tape, or when you
simply do not wish to use this feature.
THE VCR IS WAITING TO
MARK COMMERCIALS IN THE
PROGRAM YOU RECORDED.
MARKING
NOW : PUSH 1 KEY
LATER : PUSH 2 KEY
CANCEL : PUSH MENU KEY
NOW MARKING COMMERCIALS
CANCEL ; PUSH STOP KEY
Push MENU three times
to return to the normal
screen.
24