Programming the home theater remote, Code known, Code unknown – Panasonic CT-32G32U User Manual
Page 26: Infrared remote codes for specific components l
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the Home Theater Remote
The remote control can be set to control other manufacturers components, by utilizing the MODE SELECTION
BUTTONS for CABLE, DSS, VCR, RCVR (a Receiver or Amplifier), CD, LD, and AUX (for Cassette Deck, Second VCR
or a DVD.)
Code Known
Use the following procedure for setting up the
remote control using the numerical buttons
when the component’s remote code is known.
n~l Determine the brand of the component.
[2l Identify the code{s) associated with the
brand from the infrared code index {see
following pages). Record all possible
codes.
3]
Confirm that the component is plugged
in and'operating properly, then turn it
OFF.
m
Code From
Index Sheet
Press and hold theff^ button, then
the
button so that both are
pressed at the same time for at least]
■srsecondi; Then let go of the buttons.
^ Press the appropriate Mode button
for the component.
^ Enter the 3-digit code, by using the
Remote
Control
Keypad
“0”
through ”9” buttons.
[71
Press the button to test the remote. If
the
correct
code
is
setup
for
the
component (in step [B]), the component
will turn on.
Code Unknown
Use the following procedure for setting up the
remote control when the component’s remote
access code is not known. This procedure
uses the ’’sequence method”.
ID
Confirm that the component is plugged
in and operating properly, then turn it
OFF.
Press and hold the
button,
then the button so that both
are pressed at the same time for at
leasOIsecp Then let go of the
buttons.
EUR511050
m
Press the appropriate Mode button
for the device.
^ Press the button to step
over to the next code.
Press the
button to test the
remote. If the correct code is
sent, the component will turn on.
D Once the correct code Is found,
press the
button
to store the code.
Repeat from step |H| above until the
proper component code is found. It
may take several attempts before
the correct code is found.
NOTE: Some brands have multiple codes.
Repeat the procedure using another
listed
code
until
the
component
responds correctly.
NOTE: If an incorrect code is entered, or
when
the
operation
is
not
completed within 30 seconds, the
settings will not change.
Infrared Remote Codes for Specific Components
l
We/jE?/iu^W/h^ Write d
:
h
will serve as a hai
>de
numbers
for
your
components
in
idy referenced nieed to
i^the^space
provided
below.
This
^
reprogram your renipB control.
CABLE
Cable TV Converter Box
i_____
VCR
Video Cassette Recorder
CD
Compact Disc Player
DSS
Digital Satellite System
RCVR
Receiver or Amplifier
LD
Laser Disc Player
Other Component
Other Component
Other Component
□
I Other Component
II Other Component
1 Other Component
j
-
26
-