For 3-channel system, Terminal cover for short-circuit prevention – Panasonic CY-M9054EN User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For 3-Channel System:
® © © © f) © ©
)sj )sf isi lg( i^ij
• Connect the (+) cord of the Sub-woofer to
and (-) cord to ®.
• Connect the (+) cord of the left speaker to ©
and (-) cord to ©.
• Connect the (+) cord of the left speaker to
and (-) cord to ®.
Power Cord
(Option)
To battery’s
{+)
terminal.
Ground Cord
(Option)
Connect to a well grounded
metallic part of your car.
Amp. Relay Control Cord
(Option) (BlueA/Vhite stripe)
To radio antenna relay control
cord.
Side View (Output Side)
d) Terminal cover for short-
circuit prevention
(Supplied with Speaker)
Sub Woofer
Left Speaker
Right Speaker
Both of left and right channel of the input connector should be connected for front and rear side. The amplifier
will not work if both coennctions are not made properly.
Terminal cover for short-circuit prevention
This terminal cover is for preventing short-circuit be
tween adjacent terminals. Before connecting each
lead, pass it through the terminal cover. After connect
ing the leads to the terminals, cover the speaker out
put terminals and power terminals with this cover.
Make sure that the projections to prevent slipping out
are facing down.
Terminal cover for
short-circuit prevention