Before use, Parts identification, Charging – Panasonic Wet/Dry Rechargeable Shaver ES364 User Manual

Page 6: For a better shave

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before use

This Wet/Dry shaver can be used for
wet shaving with shaving lather or for
dry shaving. You can use this water­
tight shaver in the shower and clean

it in water. Treat yourself to wet lather
shaves for at least three weeks and
notice the difference. Your Panasonic
WET/DRY shaver requires a little
time to get used to because your skin
and beard need about a month to
adjust to any new shaving method.
Charge the shaver for at least 8 hours
before using it for the first time or
when it has not been in use for more
than six months.

Parts identification

(see fig. 1)

® Protective cap

® Foil frame

© Outer foil

® Inner blade

© Foil frame release button

© On/Off switch

© Switch lock button

© Trimmer

® Trimmer switch

© Charge indicator lamp

© Charging adaptor

Charging

(see fig. 2)
Switch the shaver off and set it firmly
into the charging adaptor. Keep the
adaptor level.

Plug the adaptor into an AC outlet.

The charge indicator lamp will glow

red and it will stay on until the shaver
is removed from the adaptor.
You can fully charge the shaver in 8
hours if it seems to be losing speed.
A full charge will supply enough
power for about 7 shaves (three min­
utes per shave for a normal beard).
Before traveling, charge it fully for 8
hours if you will not be taking the
charging adaptor with you.

For a better shave

Put a thin layer of shaving foam on

your face which works as lubricator.
Shaving foam is the most suitable
among many other shaving aids(gel,
soap, cream, etc). Do not put a thick

layer of shaving foam as it becomes

messy. If the shaving head is clogged
with foam, simply rinse it under run­
ning water.

Hold the shaver at a right angle (90“)

to your skin (see fig. 3). Depress the
switch lock button and slide the On/
Off switch upward to turn the shaver
on. Start out shaving by applying
gentle pressure to your face. Stretch
your skin with your free hand and

move the shaver back and forth in

the direction of your beard. You may
gently increase the amount of pres­
sure as your skin becomes accus­
tomed to this shaver. Applying exces­
sive pressure does not provide a
closer shave.

Advertising