To fast-forward or rewind the tape, Press [!◄◄/◄◄] or [►►/►►!] in the stop mode, To erase a recorded sound – Panasonic SC- AK54 User Manual

Page 20: Befóte recording (peck 2 only)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

"‘tpítapis

To fast-forward or rewind the tape

Press [!◄◄/◄◄] or [►►/►►!] in the stop mode.

biffili

i«P

I [SC-AK22: Russia and Ukraina

Tape direction

To rewind

To fast-forward

[► ► /► ► I]

[► ► /► W]

I ^

[ \^ /< ^ ^

[SC-ÀK22: except Russia and Ukraina]

To rewind

To fastTorward

To find the beginning of a program

(TPS; Tape Program Sensor]

TPS finds the beginning of a track and resumes play from there. Each

press increases the number of tracks skipped, up to a maximum of 9.

Press

or [►►^►►1] during play.

• TPS may not operate correctly in the following situations:

If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.

Befóte recording (Peck 2 only)^

Your attention is drawn to the fact that recording pre-recorded
tapes or discs or other published or broadcast material may in­

fringe copyright laws.

Types of tapes which can be recorded correctly

SC-AK22: Russia and Ukraina

SC-AK52

Use normal and high position tapes.
Metal position tapes can be used, but the unit will not be able to

record or erase them correctly.
The unit automatically identifies the type of tape.

|SC“AK22: except Russia andTikraina]

Use normal position tapes.
High position and metal position tapes can be used, but this unit will

not be able to record or erase them correctly.

Erasure prevention

The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown, being careful not to
cover the high position discrimination hole.

How volume^ sound quality/field affect recording

The tape you are recording is not affected whatsoever by changes in
volume, sound quality/field.

To erase a recorded sound

* •

3.

1. Press [TAPE, DECK 1/2].

2. Insert the recorded tape into deck 2.

______

,

and |SC-AK22: Russia and Ukrain^ only

SC-AK52

Press [REV MODE] to select reverse mode.

4. Press [• REC/STOP].

• You cannot open deck 1 while recording.
• You cannot fast-forward or rewind one deck while recording with

the other.

RQT5666

Advertising
This manual is related to the following products: