2 bitstream'2, To cancel during setup operation, To exit the initial settings screen – Panasonic DVD-RV40 User Manual

Page 38: Home theater

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

RETUFffJ

О

---------RETURN

SETUP

SETUP-------- "Ó

Home theater

When “4 MPEG" is selected

1 PCM (Factory preset)

Digital audio converted to 48 kHz/16 bit PCM (2ch) is

output during playback of OVDs recorded in MPEG audio.

2 Bitstream'2

MPEG audio bitstream (1ch-7.1ch) is output during
playback of DVDs recorded in MPEG audio.

The screen illustrated in step 2 is displayed.

To cancel during setup operation

Press [RETURN], (The previous screen is displayed.

To exit the initial settings screen

Press [SETUP] or [RETURN],

Recommended setting of
“Digital Audio Output”

Adjust settings as shown in the table below depending on the kind of

equipment that is connected to the opticai digital or coaxial (DVD-

RV40 only) audio output terminal.

Type of

equipment
connected

Recommended setting

1 PCM

Down

Conversion

2 Dolby

Digital

3 DTS

Digital

Surround

4 MPEG

No equipment is

connected

Bitstream

Ш

PCM

Digital audio
equipment
(no decoder)
(•» page 36)

Yes-1

PCM1112

Dolby Digital
decoder
(•• page 35)

Yes-11

Bjtsir.aam

o n

PCM

DTS Digital
Surround

decoder

(«► page 35)

Yes’^-1

PCM

Bitstream

PCM

Dolby Digital/DTS
Digital Surround
decoder
(^ page 35)

Yes-111 Bitstream

Bitstream

Dolby Digital /DTS
Digital Surround/
MPEG audio
decoder

(-• page 35)

Yes-1

Bitstream

Bitstream

Bitstream

• Underlined items are factory preset.

if it is set to “Yes", the player converts linear PCM to 48 kHz

even during analogue output.

Do the following if you wish to take advantage of high quality 96
kHz sound.
Select “No" and connect this player’s audio output terminal to an
amplifier’s audio input terminal with the audio/video cabie
(supplied) or an audio cable (not supplied).

■м2

When connecting an amplifier (with an optical digital or coaxial

input terminal) which does not contain a Dolby Digital, DTS

Digital Surround or MPEG audio decoder, be sure to select

“PCM" at the “2 Dolby Digital”, "Off" at the “3 DTS Digital

Surround" and “PCM" at the “4 MPEG", if “Bitstream" is
selected, any attempt to play DVDs (or CDs encoded with DTS)
may cause such a high level of noise that can injure your ears
and damage your speakers.

VQT8633

Advertising