Panasonic WV-CP120 - Manual (Page 7)

® Lens (Option) @
See pages 9, 10, 11, 12 and 13 for details on lens
selection. A standard C-mount lens can be used
with the camera by adding the optional lens mount
converter (C-mount adapter) WV-AD20.
(2) Flange-back Adjusting Ring (D
This ring is used to adjust the back focal length or
picture focus by rotating it.
(D Video Output jack (VIDEO OUT)
This jack is used to adjust the angular field of view
or focus while observing the picture on the moni­
tor,
®
© Camera Mounting Screw Hole
This screw hole (1/4" - 20) is used to mount the
camera onto a mounting bracket or a tripod.
(5) Auto Iris Lens Connector
This 4-pin connector supplies power and the DC ©
control signal to the auto iris lens,
® Volume Control (VOLUME, MIN/MAX)
The volume control is preset to center position at
the factory. Adjust it to prevent howling.
Video level Control (VIDEO LEVEL, UH)
This control adjusts the level of auto iris control
when the ALC/ELC Switchi® is set to ALC posi­
tion, or the level of electronic light control when the
ALC/ELC switch is set to ELC position.
ATW Balance Control (ATW BALANCE, R/B)
This control adjusts the red and blue color bal­
ance. It is preset to center position which usually
provides accurate color reproduction.
® Power Indicator
Camera Output Connector
This connector is used to connect a coaxial cable
to the CAMERA INPUT of the specified monitor or
camera drive unit, to receive DC power and verti­
cal drive pulse, and supply the audio and video
output of the camera,
ALC/ELC Switch (ALC/ELC)
This switch is used to choose the lens as follows.
ALC: Choose this position when using an auto iris
lens.
ELC: Choose this position when using a fixed or
manual iris lens.
-
5
-