Panasonic G350 - Manual (Page 46)

Function operation
Validity period
If you are already in the parameter selection begin with step 2
1 . I®' iSH?' 15-
To select message parameters.
2 . a or©
To display “PERIOD",
“PERIOD" will flash.
iPERIOD'r DRV
0 1 - 3 0 ^ 0 3
4 .
fF JB or Si
To change the validity period.
Example: The validity period has a range of 1 to 30 days r—zrTTr ZTZ~7-
and is set to 3 days,
!
pr © or ® '--------------------------
To select “DAY”, "WEEK”, “HOUR” or"MINUTE".
The validity period is only set as “DAY”, “WEEK”, "HOUR" or “MINUTE" and
not a combination of each, for example it cannot be set as 1 day and 7 hours.
C rSl^vi/^/4
k J. r*" Li tc i cu HwlU
The range for the validity period will be displayed on the second line.
6 . P®
To set and exit.
If you wish to modify another parameter press IB or tr until "PERIOD” flashes
then press © or ®.
Destination
If you are already in the parameter selection begin with step 2
1 .
To select message parameters.
2 . !®"©orfi
Todisplay "PHONE NO".
“PHONE NO" will flash.
3. W & or .fti
To change the destination telephone number.
The current destination telephone number wit! fash.
4. F? the destination telephone number
5. I®”®
To set and exit.
If you wish to modify another parameter press *•* or until “PHONE NO'
flashes then press © or ®.
;PH 0 ME tfO-
+n!i 1 T---i;^44E
PHONE HO I
+pii227t445-
42