Entering a password, Pcm down conversion, Dolby digital – Panasonic DVD-RV41 User Manual

Page 25: Dts digital surround, Digital output

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

■■■«II

Digital output

DVD-R V41 IDVD-RV31

Refer also to “Common procedures” page 21) and the Audio menu

in “Summary of initial settings” page 22).

Entering a password

DVD-RV41 I DVD-RV31

Refer also to “Common procedures” page 21) and the Disc menu
in “Summary of initial settings” page 22).

PCM Down Conversion

No

(Factory preset):

When you have connected an amplifier with audio cables.

Yes:

When you have connected an amplifier with an optical digital audio
cable.
Copyright protection limits digital output to 48 kHz/16 bit.

When playing DVDs recorded in 96 kHz

Sound is output as follows in accordance with the connections and
settings you have made.

Setting

Connection

Digital

Analog

No

No output (If there is no

copyright protection, audio is
output at 96 kHz.^^)

Output as
96 kHz

Yes

Converted and output as 48

kHz/16 bit

Converted and
output as 48 kHz

The connected equipment must be able to handle 96-kHz LPCM in

order to take advantage of high quality audio found on these discs.

Dolby Digital

Bitstream

(Factory preset);

When you have connected a unit with a built-in Dolby Digital decoder.

PCM:

When you have connected a unit that doesn’t have a built-in Dolby

Digital decoder.^2

DTS Digital Surround

Off

(Factory preset):

When you have connected a unit that doesn’t have a built-in DTS
decoder.^^ (No digital signal is output.)

Bitstream:

When you have connected a unit with a built-in DTS decoder.

MPEG

DVD-RV41

mmmm

(For the United Kingdom, Continental Europe,

Australia and N.Z.)

PCM (Factory preset);

When you have connected a unit that doesn’t have a built-in MPEG
decoder.

Bitstream:

When you have connected a unit with a built-in MPEG decoder.

^^These changes to digital audio output must be made, other­

wise bitstream signais the decoder cannot handle will be out­

put. If these signals are output, “noise” will be output which
can cause harm to your ears and speakers.

When setting ratings

(When the level is 8)

The password screen is shown when you select levels 0 to 7.

1. Input a 4-digit password with the numbered buttons and press

[ENTER].

• If you enter a wrong number, press [CANCEL] to erase it before

you press [ENTER].

The lock symbol appears closed to show the rating is locked.

Do not forget your password.

2. Press [ENTER] to confirm the 4 digits.

Now, when you insert a DVD that exceeds the ratings limit you

set, a message appears on the television.

Follow the on-screen instructions.

When changing ratings

(When the level is 0 to 7)

The password screen is shown when you select “Ratings”.

1. Input a 4-dlgit password with the numbered buttons and press

[ENTER].

■i

1 Change Password |

1 Change Level |

1 Temporary Unlock |

2. Select the item with [ A , V ] and press [ENTER], and follow the on­

screen instructions.

ë

.o

A

2

Q>

&

*0

s

c

§

•O

RQT5869

Advertising