External synchronization, Prevention of blooming and smear – Panasonic GP-MF130 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
EXTERNAL SYNCHRONIZATION
2 ; 1 Interlace
The GP-MF130 works in 2 : 1 interlace mode
when external 2 : 1 interlaced HDA/D signal
is supplied to pin-fi and pin-7 of the camera
connector (12-pin),
external HDA/D.
Note: If the picture appears disturbed, be sure
to match the phases of falling edges of the
PREVENTION OF BLOOMING AND SMEAR
When the camera is aimed at a bright light, such
as a spotlight, or a surface that reflects bright
light, smear or blooming may appear.Therefore,
the camera should be operated carefully in the
vicinity of extremely bright objects to avoid
smear or blooming.
- 1 0 -
Advertising