Sending a document by relayed transmission – Panasonic Panafax UF-322 User Manual
Page 108
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending a Document by Relayed Transmission
,r sT-
Once you have recorded all the necessary parameters in your machine in accordance with the Relay Network
you belong to, you can send a document to two or more stations in the network system, automatically, using
the procedure below.
1
^
Set document(s) face down.
n
DOCUMENT SET
ENTER STATION
00%
RELAYED XMT
ENTER STATION(S)
3
Dial by any combination of these.
• One-Touch Dialling
• Abbreviated Dialling
Ex:
01
and I ABBR li^fTI
O START
The document is stored into memory and your machine
starts to dial the number of the Relay Station and sends
the document.
After the Relay Station finishes its transmission to the
End Receiving Stations, your machine prints out a
RELAY XMT RESULT REPORT sent back by the Relay
Station.
ONE-TOUCH
<01>{Station name)
ABBR
STNS=002l
[27](Station name)
I
* STORE *
N0.001
PAGES=01 01%
m
Noto: You cannot use manual number dialling in step 3.
108