Tv operation, Kx check list before you begin, 1 press power to turn the combination vcr on – Panasonic PV-M1338 User Manual
Page 11: 3 press to adjust the volume level, Using the 100 key, Rapid tune, Ohio, Audio mute, Phones, Self-demo mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TV Operation
kX Check list before you begin.
Q All connections are made (see page 5).
Q Your Combination VCR is plugged in.
1
Press POWER to turn the Combination VCR on.
2
Select a channel
using CH AT or the NUMBERED keys.
3
Press
to adjust the volume level.
3
PLAY/
NITE/
PHONES
REPEAT GAME Jack
Using the 100 key
When selecting CABLE channels 100 to 125 with the NUMBERED
keys, first press the 100 key, and then enter the remaining two digits.
For example, for channel 125: Press NUMBERED keys 100-2-5.
Rapid Tune
Press R-TUNE to display the last channel you were watching.
• When selecting channels with CH
at
,
.
p *
the channels must be displayed for at
least 4 seconds in order for the Combination
VCR to recognize them as a new selection.
CH08
OHIO
Audio Mute
Press MUTE to instantly mute the sound.
Press again, to restore the previous sound level.
Phones
Connect an earphone (not supplied) or headphones (not supplied)
to the Phones Jack.
SELF-DEMO Mode
In Power ON condition, hold down PLAY/REPEAT on the Combination
VCR, with no tape inserted, for 5 seconds. The demo screen appears.
To cancel: Repeat the above operation. The demo screen disappears.
NITE/GAME Mode Feature
This feature adjusts the color and picture intensity levels so the screen is
easier on the eyes when watching a video or TV at night, or when playing
video games.
Note: This Combination VCR contains no video game software.
Press NITE/GAME repeatedly to select
the desired mode.
• “NITE” or “GAME" is displayed for 4 seconds.
• Each press of NITE/GAME will change the mode
as shown below right.
• NITE mode may be selected when watching TV
or playing a tape. GAME mode may only be
selected when watching video and playing
video games.
To Cancel the NITE or GAME mode,
press NITE/GAME until the normal screen appears.
• The previous color and picture settings will be restored.
Normal screen •
(No display)
NITE mode is cancelled when:
• the power is turned Off • a power failure occurs
GAME mode is cancelled when:
• the power is turned Off
• play mode is entered
• channel is changed
• a power failure occurs
• input signal is changed
____
11