Panasonic CT-35G31 - Manual (Page 25)

Timer Features
» Sleep Timer
• Program Timer
Special Feature:
Automatic “OFF” after 90 minutes.
The TV has a special feature that will shut itself OFF
after 90 minutes when turned ON by the program
timer unless a function key is pressed during the 90
minutes.
This feature is useful so that the TV will not remain
ON unattended for an extended period of time.
Programming the OFF timer will also cancel the
automatic OFF feature.
Sleep Timer
—This feature is used for automatic
turn off in 30, 60, or 90 minutes.
NOTE: Display will flash 3,2, and 1 to indicate the last
three remaining minutes prior to turn off. The
Recall display will also appear.
1. Press the ACTION button to display the Main
Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to select the Timer Icon.
3. Press the ACTION button to display the Timer
Control Menu.
( SLEEP TIMER NO
R^GRiAM:.TiMER"-^ : T'”'" ■
■'■■J...','" QpfT __ '..“I
CHANNEL 3 '
i: S E T , : N O . ;
----- %
^ J f V iiilirfc
4. Press the VOL RIGHT button to select NO, 30,60
or 90 minutes (Sleep Timer will be activated).
5. Press ACTION button twice to exit menus.
NOTE: To deactivate Sleep Timer repeat steps 1
through 4. in step 4 select “NO” instead of
minutes.
Helpful Hints:
Press the RECALL button to display the remaining
minutes for Sleep Timer, the time will display in the
bottom left comer.
Program Timer — This feature is capable of
turning the TV on, tuned to a desired channel and off at a
predetermined time (one day or everyday).
NOTE: The clock must be set for this feature to operate.
(Refer to the Set-Up Menu to set time.)
Press the ACTION button to display the Main Menu.-
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to select the Timer Icon.
Press the ACTION button to display the Timer
Control Menu.
4. Press the CH DOWN button to select “ON" (time).
5. Press the VOL LEFT/RIGHT button repeatedly to
set hours (set AM/PM accordingly).
6. Press the CH DOWN button to select the minutes
position.
7. Press the VOL LEFT/RIGHT button repeatedly to
set minutes.
8. Press the CH DOWN button to select “OFF” (time).
9. Repeat steps 5 through 7 for setting “OFF” (time).
10. Press the CH DOWN button to select “CHANNEL”.
11. Press the VOL LEFT/RIGHT button or use the
RerTKite Control Keypad to enter the channel number
desired when the set turns “ON”.
12. Press the CH DOWN button to select “SET’.
13. Press the VOL RIGHT button to select:
• NO - not activated.
• ONE DAY - activated.
• DAILY - activated.
NOTE: To deactivate Program Timer select “NO" in step
13. ..........
14. Press ACTION button twice to exit menus.
Helpful Hints:
• If you see “GAME GUARD” in the upper right hand
corner, the channel or Video Input you have selected
has been locked out.
• If the Program Timer “ON” functions while the set is
operating, the set will automatically tune to the chan­
nel designated in the Timer Program.
- 2 5 -