Power (stand-by) button, Sound mute button, Volume control – Panasonic TC-59R62 User Manual
Page 12: Colour control, Brightness control, Contrast control, Normalise button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NORM.
ffl
1
V/
Power (Stand-By) Button.
Push this button to turn the receiver off (Stand-by).
Push again to turn On.
Note: Do not leave the Television in Stand-By lor extended periods.
Sound Mute Button.
When activated, this will show the Mute Symbol
in Red as an On-Screen display and reduce the
sound level to minimum. Pressing the Mute
button again, or the Volume -i- or - will return the
volume to the original condition.
Volume Control.
Press the "-i-'' button to increase the volume.
Press the button to decrease the volume.
Colour Control.
Brightness Control.
Contrast Control.
Note: Normally Contrast is set at Maximum.
Sharpness Control.
The
”FUNC,''
button on the Remote Control operates in the
same principle as the
"FUNC."
button on the
front control panel. Refer to page 9.
Normalise Button.
Press this button while the On-Screen display
remains after pressing the
"FUNC."
button to
reset ALL of the Colour, Brightness, Contrast
and Sharpness levels to the factory preset
condition.
12