The unit does not work, The ватт low indicator flashes – Panasonic KX-T4300BA User Manual

Page 60

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

When pressing the SCREEN/PLAYBACK button, 3 beeps sound

and operation cannot be accomplished.

—Someone is operating the answering system.
—You are too far from the base unit. Approach it.

4 short beeps are heard twice from the portable handset.
—A new message is just recorded on your answering system.

7 7■7v^^7'i>'7^íf777Л:7■7£7^7:í .'Li.;- ::>7

After plugging in the AC adaptor, the cassette deck does not
stop rewinding.

—Disconnect the AC adaptor, and insert the micro cassette tape.

Then connect the AC adaptor again.

The Cali-Counter showed when you returned home.
—Power failure took place. If new messages have been recorded

after the power is restored, the Call-Counter cannot count them, so
press the MESSAGE PLAYBACK button for confirmation.

I cannot use the unit during a power failure.

—The unit will not function during a power failure. We recommend

that you connect a reserve telephone (standard telephone) and use

it during a power failure, (p. 11)

The unit does not work.
—The connection of the unit was made improperly, (p. 10)
—The battery of the portable handset becomes weak. Charge the

battery fully, (p. 53)

The ВАТТ LOW Indicator flashes.

—Charge the battery fully, (p. 53)

I charged the battery for 10 hours, but the ВАТТ LOW indicator

flashes after a few telephone calls.
—Clean the battery charge contacts and charge once more. (p. 53)
—It is time to change the battery. Please replace with a new one.

(P- 54)

The beginning of the cassette tape has remained unrewound
after the unit rewinds the tape.

While operating the unit, the AC adaptor feels warm.

The CHARGE indicator Sight never goes out while the portable

handset is on the base unit.

—These are normal conditions.

Advertising