Troubleshooting, Note, Error indication – Panasonic CQ-VX777EW User Manual

Page 49: Maintenance, Product servicing, Replacing the fuse, Tape, Plerse eject, Cd changer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Troubleshooting

Maintenance

Your product is designed and manufactured to ensure a minimum of maintenance. To clean the exterior of this

unit, use a soft cloth to wipe the surface. Do not use benzine, thinner, or any other type of solvent.

Product Servicing

• This unit should only be serviced by qualified technicians. Service information is not provided for customers.
• Should your unit ever require service, refer to the enclosed Panasonic Factory Service center or consult

your nearest authorized Panasonic Service Center for detailed Instructions.

Replacing the Fuse

Be sure to use a fuse of the specified rating (3A, 10A)when replacing a blown fuse. Fuses with higher

capacity ratings, use of any substitute, or connection without a fuse may result in a fire hazard or damage to
the unit.

If the replacement fuse fails, contact your nearest authorized Panasonic Service Center.

■ Error Indication

Tape

Display

Description

PLERSE EJECT

Tape cannot be ejected in this state.

Press OPEN/CLOSE button.

CD

Display

Description

PLERSE EJECT

CD cannot be ejected in this state.
Close the front panel, then press

^

CD Changer

Display

Description

n*« ■

CD is dirty or the wrong side up. The changer automatically selects the next
disc.

CD has a flaw or flaws.

!...

The set is not operating due to some cause. Press the reset button on the
changer.

■ П:“":

! ■

• ■■■

■ • ■ а ■

: ,п J

No disc is inside the CD/MD changer, or no magazine is in it.

Note:

The numerals before error symbols El and E2 are disc numbers.

49

CQ-VX777EW

Advertising