Panasonic WV-BM1700 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Power Indicator
When turning on the Power On/Off Switch(2), this
indicator lights.
2. Power On/Off Switch (POWER, ON/OFF)
This switch is used to turn on or off the power of
this monitor.
3. Scan Size Switch (SCAN SIZE
UNDER/NORMAL)
Underscanning is obtained by pressing this
switch,
4. Horizontal Hold Control [H-HOLD]
This control is used to lock in the picture horizon
tally,
5. Height Control [HEIGHT]
Adjust the verticai height of the picture.
6. Vertical Hold Control [V-HOLD]
This control is used to lock in the picture vertically.
7. Vertical Linearity Control (V-LIN)
Adjust for vertical distortion of the picture.
8. Bright Control [BRIGHT]
Turn this control clockwise to increase the overall
brightness.
9. Focus Control [FOCUS]
Adjust for the clearest picture.
10. Contrast Control [CONTRAST]
Turn this control clockwise to increase the picture
contrast.
11. Video Input Connector (VIDEO IN)
This connector accepts the input video signal.
12. Video Output Connector (VIDEO OUT)
The video input signal connected to the Video
Input Connector (11) is looped through to this con
nector.
-4-