Power, Volume, Anti-volume-blast circuit – Panasonic CQ-DP171U User Manual
Page 11: Mute, Mode selection, Cd player, Tuner, Cd changer, Power and sound controls, Loudness
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Power and Sound Controls
Power
Turn the key in the ignition until the accessory indicator iights.
Power on : Press [SOURCE] (PWR).
Power off: Press [SOURCE] (PWR) again and hold.
Note:
When you use this unit for the first time, a demon
stration message appears on the display.
To cancel this display, press [DISP].
Volume
[AVOL]: Up
IVVOL] :
Down
Press and hold for rapid adjustment.
Anti-Volume-Blast Circuit:
When the power is switched off and on again, the volume
slowly rises to the previous level.
The anti-volume-blast circuit will not work when the volume
level is set lower than position 20 on the display.
Volume level (Oto 40)
Remote control sensor
Mute
Press [MUTE] to mute the sound completely.
Loudness
(Only for main unit)
Press
[LOUD]
to enhance bass and treble
tones at low or medium volume.
Press [MUTE] again to cancel.
Press
[LOUD]
again to cancel.
Mode Selection
Press [SOURCE] to change the mode.
CD Player
Tuner
{^page 14)
(When a CD is in the player.)
(“♦ page 16)
or
CD Changer
MP3 Player
{When a CD changer is connected and
magazine is in the changer.) page 22)
(When a MP3 files recorded disc
is in the player.) page 18)
CQ-DP171U
11