Unpacking, Installing the network card – Panasonic KX-PNB2 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Unpacking
If you purchased the Network Card as an option, make sure that the following items are included.
Report damage or shortages to the reseller from where the Network Card was purchased.
I
mportant
• Save the original carton and packing materials for future shipping and transporting of
the Network Card.
Installing the Network Card
I
mportant
• To prevent damage, be sure to turn OFF the printer when installing/uninstalling the
Network Card.
• Before installing the Network Card you should discharge any static electricity by
touching any exposed metal surface on the printer, while the printer is stiii plugged
in to a grounded AC outlet.
• Do not touch any electrical components on the surface of the board to avoid static
electricity.
• Use a shielded cable when using a 100 Base-TX/10 Base-T (RJ-45 type) port to
ensure emission compliance.
• Do not remove the components which are not indicated.