Panasonic PV-4651 - Manual (Page 18)

Timer Recording
Your VCR can be set up to do a recording
while you are away or otherwise occupied.
Up to 8 programs can be placed in
memory. You can choose to record one
time, daily, or weekly.
LiS^iheck list before you begin.
O All connections are made.
(See pages 6-9.)
[_l TV and VCR are plugged in and turned on.
n VCR/TV selector is set to “VCR."
□ Clock is set to correct time.
n Record tab in place. (See page 5.)
(D o
PROG
Push PROG to display
the program screen.
• If a program is already in
memory, use the Wheel to
select an unused program
number.
START STOP CH
ELECT START DATE
BY ROTATING WHEEL
: PUSH WHEEL->
TO END PUSH PROG KEY
1 ---------- ------------------- 1
r~p o o o CS> e CED • •
u
Multi Function Display
Rotate and push the
WHEEL to select and
set the DATE.
Today's Date
I
^,.-WEEKLY(SAT)^— 7 -►8-9--
WEEKLY
(MON)
Example
Wheel Selection Order
■WE£KLY(Sl)H)- - - - OWLY—6-
Daily and Weekly Timer Recording
If you want the program to be recorded daily
(Mon thru Fri), enter DAILY In place of the
DATE in step 2. If you want the recording to
be on a weekly basis, enter WEEKLY MON,
TUE, etc..
i!!i
WdNlFV
iUNi I N
TO EN
ay ROTATING WHEEL
: PUSH WHEEL-»
TO END POSH PROG KEY
Rotate and push the
WHEEL to select and
set remaining items
at right.
Remaining Items
to be set;
* START time
* STOP time
• CH(annel) number,
or LINE for outside
source recording.
• Speed (SP, LP, SLP).
To Make Corrections
Repeatedly push the Wheel to move forward, or the CLEAR button to
move back to the desired item. Then, select and set continue with step 3.
PROG
Push PROG to end
the program.
• If you want to enter more
programs, select a blank
program number with Wheel
and repeat steps 2 and 3.
P DT STRAT STOP CH SPD
IliM ■
2--------------
3 -----------
4 -----------
SELECT 1-B:ROTATE WHEEL
ENTER :PUSH WHEEL
CANCEL :PUSH CLEAR KEY
END rPUSH PROG KEY
Push PROG to exit
this mode.
PROG
Push POWER off
to set the timer.
• When recording programs via
a cable box, make sure the
cable box is left ON and
tuned to the desired channel.
TIMER
Multi Function Display
18
If the cassette record tab is missing at the time the POWER is turned OFF, the tape ejects and
the TIMER indicator flashes.
If the start times of two programs overlap, the tower numbered program will have priority.
If the start time for a Wmer recording comes up during a normal recording or One Touch Recording (page 14),
the timer recording will not be performed.
If there is a power interruption of more than one minute, the recording will not be performed or continue.
If “PROGRAM IS INCOMPLETE" appears on-screen in step 4, check all entries and make necessary corrections