Before starting measurements, Press, 8/ 8 ;ii58 – Panasonic EW3152 User Manual
Page 12: Open the display, Setting the date and time, Set the month, Set the day, Set the hour
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BEFORE STARTING MEASUREMENTS
Open the display
Press
the Open button for display
on the front of the main unit.
' The display will only open partially by itself.
Use your hand to open the display fully for
use.
Setting the date and time
* Please be sure to set the date and time before taking the first measurement after
purchasing the blood pressure monitor or after changing the batteries.
• If measurements are taken without setting the date and time, the date and time
will not be stored.
• Please read the 'Caution when using only the AC adapter" on p. 10.
1
3/ '
Press
the Set button
below the display.
The month value will blink.
Set the month.
Press the Adjust button
repeatedly to set the
correct month.
Set the day.
(D Press the Set button. The
day value will blink.
@ Press the Adjust button
repeatedly to set the
correct day.
8/ 8
4
Set the hour.
0 Press the Set button. The
^5
6
7
8/ 8 ;ii58
hour value will blink.
0 Press the Adjust button to
set the corred hour.
Set the minute.
0 Press the Set button. The
minute value will blink.
0 Press the Adjust button
repeatedly to set the correct
minute.
Press the Set button at
the exact time the minute
changes to finalize
the date/time setting.
Press the On/Off Start
button
to switch off
the power
When the date or time are blinking, the clock is stopped.
During leap years, 3/1 will be displayed on February 29. For this reason, reset the date to 2/29.
Use the tip of a ballpoint pen or similar object to lightly press the Set and Adjust buttons. If you use
a mechanical pencil, the lead may break, causing a malfunction.
12