When using batteries, Closed, Remove – Panasonic EW3152 User Manual
Page 11: Slide, Install
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WHEN USING BATTERIES
* Always use alkaline batteries. (FourAA-size LR6 alkaline batteries)
(Use only alkaline batteries. Do not use other types of batteries.)
1
2
3
4
Turn the main body over, press
lightly on the mark on the
battery cover, and
remove
the cover by sliding
it in the direction of the arrow.
Slide
the battery holder
out
In the direction of the arrow.
Check the polarities of the batteries
and
install
them correctly.
Slide
the battery holder back
in.
(An operating sound may be
heard momentarily when the
battery holder Is put back in.)
Replace the battery cover and slide
»closed.
Replace batteries when:
The mark shown at left appears during use.
All displays are lit for a moment after the On/OfF Start button Is
pressed, and then the display goes blank.
No display appears even if the On/Off Start button is pressed.
<X)
Approximately 200 measurements (approximately 2 months when measurements are
taken 3 times per day) can be taken with a set of fresh Panasonic alkaline batteries
(four AA-sIze LR6 batteries). (Measurement conditions: Room temperature 22°C
(72°F); Pressurized to 170mmHg; Upper arm circumference: 30cm (11-51/64"))
(The supplied batteries are included for trial purpose only. Accordingly, there is no
guarantee regarding the length of their useful lives.)
Even If the product Is not used for a long time, be sure to replace batteries once a
year. If battery replacement Is delayed, damage due to battery leakage may occur.
When replacing batteries, always use four fresh alkaline batteries of the same type
from the same manufacturer.
When room temperature Is low, battery life may become shorter.
11