Panasonic FP7750 - Manual (Page 36)

User Preset
User Preset modes can change the initial copy mode, if necessary.
(See P.4D, 41)
User prssBl mode
sele[:t item
1 1
1 Paper size | I
2 Paper size priority Letter 1 1
a Margin value default ID mm 1 1
4 Edge value default 5 mm 1 1
5 Bouk value default 2D mm 1
I 4- I (1/43 ( 1
User prssBl mode
se I ec I ilem
OK
1 Margin reduction defaull 100% 1 1
2 Seller made default Nonsorl 1 1
3 Duplex made default 1 1
4 2 in 1 default Reduc. 1 1
5 Auln edge default ON 1 1
1 <- 1 ( 2 / 4 3 1 1
Screen
No.
Modes Function Initial Setting
1. Paper size Sets the paper size of each paper drawer
(Ledger, Legal, Letter, Letter R or Invoice
size).
See P.33
2. Paper size priority Specifies the paper size of most frequent
usage.
Letter
1/4
3. Margin value default Selects the margin shift value
(5 mm, 10 mm, 15 mm or 20 mm).
10 mm
4. Edge value default Selects the edge width
(5 mm, 10 mm, 15 mm or 20 mm).
5 mm
5. Bock value default Selects the book void width
(15 mm, 20 mm, 25 mm or 30 mm).
20 mm
1. Margin reduction
default
Selects the reduction ratio in margin mode
(95%, 33%, 91% or 100%).
100%
2. Sorter mode default Determines the mosl frequent usage mode
(non sort, sort, staple sort or group).
Nonsort
2/4 3. Duplex mode default Determines most frequent usage mode,
(□ ^ [2], [D ^ [2], book ^ [2] or No).
Ш-¥Ш7750
No/7742
4. 2 in 1 Copy ratio Selects whether to copy full size or
reduclion in the 2 in 1 mode.
Reduction
5. Auto Edge default Selects whether or not to disable Auto
Edge Deletion*.
ON
C
NOTE
:) ^ Auto Edge Deletion
To copy from the platen with the original cover or i-ADF open. Normally, this makes a
copy with a solid (black) area around the original if the original is smaller than the
copy paper. This mode eliminates the solid area automatically.
Item numbers (1,2, 3, 4, 5) and (Reserved) are not indicated on the display.
36