Panasonic PANASYNC/PRO TX-D1F64 - Manual (Page 9)

Pin Assignment
Follow the instructions below to connect the PllOi to a computer.
A. Signal connector: 15 pin mini D-Sub (PS / 2 or PC / AT compatible model)
Connect the signal cable to the 15 pin mini D-Sub connector on the display unit.
B. Signal connector: 15 pin D-Sub (Apple computer)
Convert a MAC 15 pin D-Sub connector to a 15 pin mini D-Sub connector using a Panasonic MAC
adapter, and connect it to the 15 pin mini D-Sub connector on the display unit.
< REAR PANEL >
( rep I ( greei ^ [ beuei | h - syhc 1 rvsvMct
Pin assignments of 15 pin mini D-Sub connector
Pin number Signal name
1 Red video signal
2 Green video signal
3 Blue video signal
4 Ground
5 Ground*
6 Ground for Red video signal
7 Ground for Green video signal
8 Ground for Blue video signal
9 Unused
10 Ground
11 Ground
12 SDA* (Bi-directional Data)
13 Horizontal sync, signal
14 Vertical sync, signal
15 SCL* (Data Clock)
C. Signal connector: BNC connector
*: “VESA”s Display Data Channel (DDC) Standard
Sync on green system
Connect the signal cable to RED, GREEN (sync
ongreen) and BLUE BNC connectors.
Composite sync system
Connect the signal cable to RED, GREEN, BLUE
and H-SYNC (H / V composite) BNC connectors.
[REOl IGREENl (BLUEl (H-SYNCl (V-S y HC)
O
□
Separate sync system
Connect the signal cable to RED, GREEN, BLUE
and H-SYNC and V-SYNC BNC connectors.
Note : If your computer’s video output is over
110 MHz, it is recommended that it be
used with the BNC connectors.
External View
Dimensions
Width : 498 mm (19.6")
Height : 477.5 mm (18.8")
Depth : 494.5 mm (19.5")
Base diameter :<l>300 mm (<t>11.8")
Height without stand: 432.5 mm (17.0")
*an / Tilt range
Up 13 degrees
Down 3 degrees
Left, right : 90 degrees each
••To
U
8